The entrypoint to the Ditto SDK. More...

Public Member Functions
unsafe	Ditto (DittoIdentity identity=default, string workingDir="ditto")
	Initializes a new instance of the Ditto class. More...

void	StartSync ()
	Starts the network transports. Ditto will connect to other devices. More...

void	TryStartSync ()
	Starts the network transports. Ditto will connect to other devices. More...

void	StopSync ()
	Stops all network transports. More...

void	SetTransportConfig (DittoTransportConfig config)
	Assign a new transports configuration. By default peer-to-peer transports are enabled. More...

unsafe void	SetLicenseToken (string licenseToken)
	Activate a Ditto instance by setting a license token. You cannot sync with Ditto before you have activated it. More...

unsafe void	SetAccessLicense (string license)
	Activate a Ditto instance by setting a license token. You cannot sync with Ditto before you have activated it. More...

DittoTransportDiagnostics	TransportDiagnostics ()
	Request bulk status information about the transports. This is mostly intended for statistical or debugging purposes. More...

DittoPeersObserver	ObservePeers (Action< List< DittoRemotePeer >> callback)
	Request information about Ditto peers in range of this device. This method returns an observer which should be held as long as updates are required. A newly registered observer will have a peers update delivered to it immediately. From then on it will be invoked repeatedly when Ditto devices come and go, or the active connections to them change. More...

unsafe void	RunGarbageCollection ()
	Removes all sync metadata for any remote peers which aren't currently connected. This method shouldn't usually be called. Manually running garbage collection often will result in slower sync times. Ditto automatically runs a garbage a collection process in the background at optimal times. More...

Properties
bool	Activated `[get]`
	Gets a value indicating whether or not the SDK has been activated. More...

unsafe ulong	SiteId `[get]`
	Gets the unique identifier of a peer in Ditto's distributed mesh network. More...

DittoStore	Store `[get]`
	Gets a reference to the embedded data store. More...

unsafe string	SDKVersion `[get]`
	Gets a string identifying the version of the Ditto SDK. More...

DittoAuthenticator	Authenticator `[get]`
	Gets a `DittoAuthenticator` that provides access to authentication methods for logging on to Ditto Cloud. More...

Detailed Description

The entrypoint to the Ditto SDK.

For a Ditto instance to continue to connect to other devices it must be kept in scope.

Constructor & Destructor Documentation

◆ Ditto()

unsafe DittoSDK.Ditto.Ditto	(	DittoIdentity	identity = `default`,
		string	workingDir = `"ditto"`
	)

inline

Initializes a new instance of the Ditto class.

Parameters

identity	Provide the identity of the entity that is interacting with Ditto.
workingDir	The directory that will be used to persist Ditto data.

Member Function Documentation

◆ ObservePeers()

DittoPeersObserver DittoSDK.Ditto.ObservePeers ( Action< List< DittoRemotePeer >> callback )

inline

Request information about Ditto peers in range of this device. This method returns an observer which should be held as long as updates are required. A newly registered observer will have a peers update delivered to it immediately. From then on it will be invoked repeatedly when Ditto devices come and go, or the active connections to them change.

Parameters

callback The Action that will be invoked when there is a presence update.

Returns: A DittoPeersObserver instance, which must be retained to continue receiving callback updates.

◆ RunGarbageCollection()

unsafe void DittoSDK.Ditto.RunGarbageCollection ( )

inline

Removes all sync metadata for any remote peers which aren't currently connected. This method shouldn't usually be called. Manually running garbage collection often will result in slower sync times. Ditto automatically runs a garbage a collection process in the background at optimal times.

Manually running garbage collection is typically only useful during testing if large amounts of data are being generated. Alternatively, if an entire data set is to be evicted and it's clear that maintaining this metadata isn't necessary, then garbage collection could be run after evicting the old data.

◆ SetAccessLicense()

unsafe void DittoSDK.Ditto.SetAccessLicense ( string license )

inline

Activate a Ditto instance by setting a license token. You cannot sync with Ditto before you have activated it.

Parameters

license The license token to activate the Ditto instance with, which you can find on the Ditto portal (https://portal.ditto.live).

Exceptions

DittoException Thrown if the provided license token is expired or invalid.

◆ SetLicenseToken()

unsafe void DittoSDK.Ditto.SetLicenseToken ( string licenseToken )

inline

Activate a Ditto instance by setting a license token. You cannot sync with Ditto before you have activated it.

Parameters

licenseToken The license token to activate the Ditto instance with, which you can find on the Ditto portal (https://portal.ditto.live).

Exceptions

DittoException Thrown if the provided license token is expired or invalid.

◆ SetTransportConfig()

void DittoSDK.Ditto.SetTransportConfig ( DittoTransportConfig config )

inline

Assign a new transports configuration. By default peer-to-peer transports are enabled.

You may use this method to alter the configuration at any time, however sync will not begin until TryStartSync() is called.

Parameters

config The new configuration to apply.

◆ StartSync()

void DittoSDK.Ditto.StartSync ( )

inline

Starts the network transports. Ditto will connect to other devices.

By default Ditto will enable all peer-to-peer transport types. The network configuration can be customized using the SetTransportConfig method.

Exceptions

InvalidOperationException Thrown if the Ditto instance hasn't been activated by a successful call to SetLicenseToken.

◆ StopSync()

void DittoSDK.Ditto.StopSync ( )

inline

Stops all network transports.

You may continue to use the database locally but no data will sync to or from other devices.

◆ TransportDiagnostics()

DittoTransportDiagnostics DittoSDK.Ditto.TransportDiagnostics ( )

inline

Request bulk status information about the transports. This is mostly intended for statistical or debugging purposes.

Returns: An instance of DittoTransportDiagnostics that represents the current state of the network transports that the SDK is using.

◆ TryStartSync()

void DittoSDK.Ditto.TryStartSync ( )

inline

Starts the network transports. Ditto will connect to other devices.

By default Ditto will enable all peer-to-peer transport types. The network configuration can be customized using the SetTransportConfig method.

Exceptions

DittoException Thrown if the Ditto instance hasn't been activated by a successful call to SetLicenseToken.

Property Documentation

◆ Activated

bool DittoSDK.Ditto.Activated

get

Gets a value indicating whether or not the SDK has been activated.

If false then you need to call Ditto.SetLicenseToken(string) before interacting with the SDK.

◆ Authenticator

DittoAuthenticator DittoSDK.Ditto.Authenticator

get

Gets a DittoAuthenticator that provides access to authentication methods for logging on to Ditto Cloud.

◆ SDKVersion

unsafe string DittoSDK.Ditto.SDKVersion

get

Gets a string identifying the version of the Ditto SDK.

Returns: A string identifying the version of the Ditto SDK.

◆ SiteId

unsafe ulong DittoSDK.Ditto.SiteId

get

Gets the unique identifier of a peer in Ditto's distributed mesh network.

IMPORTANT: This must be unique or the merging and conflict resolution will have unexpected behavior.

◆ Store

DittoStore DittoSDK.Ditto.Store

get

Gets a reference to the embedded data store.

Public Member Functions

Properties

Detailed Description

Constructor & Destructor Documentation

◆ Ditto()

Member Function Documentation

◆ ObservePeers()

◆ RunGarbageCollection()

◆ SetAccessLicense()

◆ SetLicenseToken()

◆ SetTransportConfig()

◆ StartSync()

◆ StopSync()

◆ TransportDiagnostics()

◆ TryStartSync()

Property Documentation

◆ Activated

◆ Authenticator

◆ SDKVersion

◆ SiteId

◆ Store